| |
| E&H #775-5 |
Pressure sensitive adhesive |
BMS 5-91 Rev. M Type II |
| E&H #776 M |
Pressure sensitive adhesive |
DMS 2066 |
E&H #1400-3
|
Heat activated adhesive |
DMS 2063 |
| E&H #1408-2 |
Heat activated adhesive for bonding metal nameplates |
DPM 5634 |
| E&H #1409-3 |
Fire retardant low heat release heat activated adhesive |
|
| E&H #775-3FR3 |
Fire retardant low heat release pressure sensitive adhesive |
|
| E&H #5-773-4 |
Moisture barrier for corrosion protection |
DMS 2128 Rev.B Type I
Class I
|
| E&H #5-741-DC |
Moisture barrier disc |
DPM 5384 Rev. B |
| E&H #770-3FRD |
Tedlar insulation blanket splicing tape (METALIZED) |
DMS 1984 Rev. N Type 5
Class 2 |
| E&H #770-3FRB |
Polyester insulation blanket splicing tape (BLACK) |
DPM 6237 |
| E&H #70-OB |
Polyester insulation blanket splicing tape (BLACK) |
BMS 5-149 Rev C TYPE XI CLASS 00 GRADE B |
| E&H #70-1B |
Polyester insulation blanket splicing tape (BLACK) |
BMS 5-149 Rev C TYPE XI
CLASS 1&2 GRADE B |
| E&H #70-OC |
Polyester insulation blanket splicing tape (WHITE) |
BMS 5-149 Rev C TYPE XI
CLASS 1&2 GRADE B |
| E&H #70-IC |
Polyester insulation blanket splicing tape (WHITE) |
BMS 5-149 Rev C TYPE XI
CLASS 1&2 GRADE C |
| E&H #73-MBT |
Polyimide insulation blanket splicing tape (YELLOW) |
BMS 5-157 TYPE I, III, IV
GRADE A&B
|
| E&H #73-1TD |
Tedlar insulation blanket splicing tape (METALIZED) |
BMS 5-157 TYPE II
GRADE A&B |
| E&H #73-T |
Two sided Tedlar insulation blanket splicing tape (WHITE) |
BMS 8-39 TYPE VIA |
| E&H #1550FR |
Tedlar insulation blanket splicing tape (WHITE) |
BMS 5-149 Rev C TYPE XII
CLASS 1&2 GRADE C |
| |
|
|
| |
Special application foam |
|
|
|
| Polyester |
70-01C, 70-0C, 70-1B |
| Metalized Tedlar |
770-3FRD, 73-MBT |
| Unmetalized Tedlar |
73-T |
| Unmetalized Polyimide |
73-KBT |
| Metalized Polyimide |
75-PS |
775-FR3 Series Fire-retardant Acrylic-based Pressure-sensitive Adhesive Film
Designed for non-structural interior bonding application, including tedlar, vinyl, polycarbonate, fabric and leather décor, foam, labels, etc. Available unsupported in thicknesses of .0015 to .005 mil and supported in .003 mil.
1409-3 Series Fire-retardant Heat Activated Film
Features good adhesion to aluminum, ABS tedlar, and a variety of other metals and plastics. Adhesive is easily adapted to substrate roll or sheet stock through application with heated nip rollers. Approved for bonding décor to commercial aircraft interior sidewall or ceiling panels. Available in rolls.
Pressure Sensitive Insulation Cover Splicing Tape Series
Used in the fabrication of insulation blanket covers and for the installation and repair of insulation systems in all aircraft. Can be used for sealing sewn seams and for closing fabrication slits or holes around brackets, conduits or other object that must pierce the insulation. Meets FAR 25.853, the new FAR Radiant Heat Test, and Boeing and Douglas specifications.
5-773-4 Series Pressure Sensitive Polyester Moisture Barrier
Primarily intended to prevent moisture contact with aircraft flooring structure such as under doorways, lavatory and galley floors and for dissimilar metal protection. Available in ½” to 54” widths.
901 Series Peel Coat
Protective removable film used to protect surfaces from marring, dirt and abrasion during and after all phases of construction and interior completion.
|
