PATCO® 1800
Flame Retardant Galley Tape
APPLICATIONS
- Aircraft corrosion inhibitor.
- Aircraft wetseal applications in main; cabin areas such as galleys, lavatories, entryways,
and other areas susceptible to moisture. - Meets FAR 25.853(a) Appendix F for Interior Aircraft Use
FEATURES & BENEFITS
- Tough, conformable, and moisture resistant.
- Permanent and flame retardant.
- Allows wide width usage.
- Helps prevent corrosion on floor structures.
- Will not delaminate.
- Meets FAR requirements.
- Compatible with most sealants.
- Fast applications.
- Can be die-cut to various shapes.
| Test | Typical Value | Typical Value (Metric) | Test Method |
|---|---|---|---|
| Download PDF | |||
| Total Thickness | 10 mils | 254 microns | PSTC-33 |
| Substrate Thickness | 8.5 mils | 216 microns | PSTC-33 |
| Adhesion to Steel | 50 oz/in. | 0.547 N/mm | ASTM – D3330 |
| Tensile Strength | 25 lb/in. | 4.378 N/mm | ASTM – D3759 |
| Elongation (%) | 200% | ||
| Application Temperature Range | 50°F to 120°F | 10°C to 49°C | |
| Operating Temperature Range | -40°F to 200°F | -40°C to 93°C | |
CONSTRUCTION:
Backing: Polyvinyl Chloride Adhesive:
Acrylic Liner: #53
Coated Kraft Paper
Colors: Black
** Recommended storage conditions: 40-60% Humidity, 60°F – 80°F
The information presented herein was prepared at BERRY PLASTICS CORPORATION by qualified technical personnel. To Berry’s knowledge it is true and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are submitted only for the user’s information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which BERRY PLASTICS assumes any legal responsibility.
