Patco® D9100SW
FR Aircaft Waterseal Tape and Corrosion Inhibitor

Download PDF

APPLICATIONS

Floor joint sealing on aircraft decking in all wet areas including:

  • Entryways
  • Galleys
  • Lavatories
  • Other areas susceptible to moisture
  • Surface protection
  • Sound dampening

FEATURES & BENEFITS

  • Tough & durable.
  • Moisture resistant.
  • Flame retardant – meets FAR 25.853(a)
  • Allows wide-width usage; can be die-cut.
  • Helps prevent corrosion on floor structures.
  • Can be used directly over wet sealant.
  • Easy to apply.
  • Meets BMS 8-346B, Airbus 10-05-004.
  • No release liner to discard.
TEST DATA
Test Typical Value Typical Value (Metric) Test Method
Download PDF
Total Thickness 9 mils 229 Microns PSTC-33
Adhesion to Steel 50 oz/in. 0.547 N/mm ASTM – D3330
Tensile Strength 60 lb/in. 10.508 N/mm ASTM – D3759
Elongation (%) 600%
Application Temperature Range 50°F to 120°F 10°C to 49°C
Operating Temperature Range -65°F to 300°F -54°C to 148°C

 

PRODUCT DESCRIPTION:

Single-Coated Construction Backing:
Substrate: Interior Grade Aromatic Polyurethane
Adhesive: Urethane-based
Colors: Transparent

GENERAL INFORMATION

  • Flame retardant: meets FAR 25.853(a) 12 second vertical burn test for interior aircraft use.
  • Supplies with FAA 8110-3 form to verify compliance with 25.853(a).
  • Meets Boeing Material Specification BMS 8-346A.
  • Meets Airbus AIMS 10-05-004.
  • Shelf life is 18 months from date of manufacture. Store in clean dry area at +70°F. (21°C), 50% RH.
  • Weight: 1.282 oz/sq.ft.

** Recommended storage conditions: 40-60% Humidity, 60°F – 80°F

The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry’s knowledge it is true and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are submitted only for the user’s information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which BERRY PLASTICS assumes any legal responsibility