Polyken® 108 Flame Retardant
Flame Retardant (FR) Double-Faced Carpet Tape

Download PDF
Download MSDS

Flame retardant double-coated cloth tape with flame retardant synthetic rubber adhesive

APPLICATIONS

  • For carpet installation on interior floors and stairs of aircraft
  • General mounting & holding

FEATURES

  • Cloth Reinforcement
  • Differential Natural rubber based adhesive
  • Boeing, Douglass & Lockheed approvals

BENEFITS

  • Good strength and elongation for easy tear, application and removal
  • Conformable and moisture resistant
  • Clean removal from most surfaces
  • Aggressive bond for secure hold
  • Repositionable adhesive for easy installation
  • Meets requirement for use by major aircraft manufacturers as well as major airlines

CERTIFICATION:

Boeing – BMS 5-133-C
FAA – FAR 25.853 (a)
Douglas DMS 1971
Lockheed LAC C-24-1257
Embraer MEP 06*048
Listed Fk05-121 & Fk05-197


Performance Specifications

 Measurement US Value Metric Value Test Method
Download PDF  / Download MSDS
60 Second Vertical Burn Length 4.5 in F.A.R. 25.853 (a)
Adhesion to Steel (air) 60 oz/in 6.57 N/cm PSTC-101
Tensile Strength 55 lb/in 96.32 N/cm ASTM D-1000
Weight 13 oz/sq yd 472.9 g/m2 ASTM D-1000
Operating Temperature 40°F to 200°F 4 to 93°C
Exiting Time 1.5 sec FAR 25.853(a)
Burn Length 4.5″ FAR 25.853(a)
Total Thickness 15Mils 381 mic ASTM D-1000
Weight 13oz/sq yd 441g/m² ASTM D-1000

** Recommended storage conditions: 40-60% Humidity, 60°F – 80°F

Standard Shelf Life (at 25C): 24 months from date of manufacture.

The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualiÿed technical personnel. To Berry Plastics’ knowledge it is true and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are submitted only for the user’s information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of ÿtness for a particular purpose), or a representation for which BERRY PLASTICS assumes any legal responsibility.