Vinyl Protection Tape
Super-strong, flame resistant tape engineered expressly for applications where high temperatures are present – harness wrapping wire to be used around ovens or hearths; splicing or holding components subjected to high process temperatures. Approved for use as an aircraft cargo liner tape. Also recommended for heavy-duty bundling – especially where flame resistance is vital – and to protect stainless steel and other polished metal surfaces from splatter during welding or soldering.
FEATURES & BENEFITS
- High tensile strength.
- Provides a heat bonding adhesive – after application of heat, tape adhesion increases up to four times.
- Government specification FAR Part 25. Section 853.
|Note: The above are typical values and should not be used in writing specifications. Customer is responsible to ensure product meets intended application requirements before approved for use.
|Polyvinyl chloride (PVC) film, 0.356 mm – PSTC-33
|Rubber-based, 89.6 g/mm, ASTM – D3330
|Total Tape Thickness
|10.0 mils / 0.254mm
|28 lbs. per in. / 5.00 kg per cm
|Adhesion to Steel
|30 oz. per in. / 335 gm per cm
|Will not support combustion
|40º F to 150ºF
|-35º F to 225ºF
|Approval for listing
|International Association of Plumbing and Mechanical Officials’ Directory
** Recommended storage conditions: 40-60% Humidity, 60°F – 80°F
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry’s knowledge it is true and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are submitted only for the user’s information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which BERRY PLASTICS assumes any legal responsibility.